Draft Beer Kits

New Draft Beer Technology

This is some awesome new beer technology.  Thought I’d share.

If you have some awesome beer technology to share, join us at the Pub for Beer Enthusiasts, Beertaps.com Pub.

DIY – Enjoy Draft Beer From These Unique Beer Tap Locations

Wall Tap Ideas

Costly Mistakes With Your Kegerator Conversion

You can’t just go in blindly when you are converting your old refrigerator into a kegerator.  I’ve seen some horrible mistakes.  I’ve seen mistakes that have caused the refrigerator to be no longer usable in any capacity.  You don’t want your refrigerator conversion to turn into any of these catastrophes:

One day, a few friends of mine were enjoying their draft beers out of their freshly converted kegerator when all of a sudden they heard a pop.  They didn’t think anything of it because they had been hearing different sounds all day.  One of the beer enthusiasts decided to pour another drink and got a half glass with a lot of foam.  After closer observation, the beer line had popped off the regulator and was damaged.  The beer drinking fun was over until the beer line was replaced.  A good bit of beer was on the bottom of the refrigerator too.  A nice mess to clean up when you have a CO2 tank pumping air through a line to make sure the beer keeps flowing.

I have actually witnessed the next mistake go both ways.  The CO2 regulator needs to be set to the right psi.  Not over and not under.  Can you imagine walking up to the kegerator and not getting anything out of it?  Or worse yet, can you imagine damaging a beer line because you had the psi too high?  Great ways to ruin a party.

But, the one that takes the cake is the amateur who decided to just drill the hole through the door without knowing what he was doing.  The hole was too big for the shank because this guy wanted to drill the hole as big as the nuts.  Enough said about that!  Scrap the refrigerator and go find another one.

So before you make any of these mistakes, make sure that you know everything you need to know before you get started:

Converting a Refrigerator into a Kegerator

You Never Know What Can Happen When You Put Your Draft Beer Kits To Good Use

There are beer enthusiasts who are deeply enriched in the beer making world, who own their own home breweries and who take advantage of all the benefits. Then, there are beer enthusiasts who have never even thought of making their own. I can’t imagine why a beer enthusiast wouldn’t at least be interested in giving it a try, but I’m going to try to change that now.

There are many benefits to brewing your own beer and I’m going to take it one step at a time. When you are ready to get off this wild ride, take stage coach left and no one will think any less of you for it. But I bet once this journey begins, you will want to ride it until the wheels fall off.

First, brewing your own beer is a way of putting a mark on your own home bar. You can even get online and design yourself a label and then place it on your bottles, glasses and beer taps even. When company comes over, you can have them all try it. It might just become their favorite beer meaning you might just get company more often if that seems like something you would like to have.

Then, you can start marketing your beer to the local bars. Give them a taste and see if they like it. There are different ways to make this happen. You can get in touch with a local bar owner and tell them you would like to have a tasting at their bar. You offer some of your beer for free and then when people say they like the taste, the bar owner will most likely want to stock it. Make a thing of it. It’s supposed to be a fun time. So, have fun!

The next logical level is to enter into some beer events. Start locally, but again have fun. Go across the country if you want. The more exposure you get, the more buyers you get. Don’t be surprised when someone approaches you to see if you want a sponsor. Sponsorship can take you to levels you have never imagined. Nationwide distribution. Export. International attention.

By this time of course, you have expanded your enterprise to include so much more than a bucket and a kegerator. You have built your brewery into a high powered system that produces enough beer to satisfy all your orders. You’ve moved your operation to a local location that houses your brewery and invites the neighbors to wander in and have a beer. You’ve had to apply for your beer license so that you can start selling your beer and you’ve had to build a bar so that your neighbors have a comfortable place to sit. You’ve got a sign on the front of your place with your name on it and you’ve been highlighted in the paper as the local beer expert.

With a few different flavors now in your inventory, you can have a seat. Take a breath. You’re finished the first phase of Operation Your Brew. The rest of the ride goes anywhere you want it to go.

Great Home Bar Ideas

It’s extremely understandable that a beer enthusiast with home bar dreams might get a little out of hand. Of course, it’s a phenomenon that home bars are always quite unique and that should be your ultimate goal. But, you have to start somewhere first and then you have to know when to quit.

Your home bar needs more of you than anything else. But, you need a place to start and then you can start pouring your own personality into it. Let’s begin with the basics, discuss different ideas and then move on to how you can bring a bit of you to your own home bar.

The Bar

Of course, any conversation about a home bar would have to begin with the bar itself. Different types of bars normally begin with a wood décor. But, you can go with stone, marble, or leather as just a few ideas to start.

Of course, your stone or marble bar doesn’t have to be expensive. It can be framed with 2×4s and plywood. Then, cover with stone or marble veneer. Leather can be pasted on and then stylishly fastened with brass snaps. But, the wood look is the best.

Of course, you would still frame with 2×4s and plywood. But then, you want to add the nice looking finish of cedar or pine. Why use the ancient not-so-flattering wood paneling when you can have a great looking bar with the quality natural wood look of grooved paneling? No, I am not a salesperson.

You can panel the top as well. But then, add some style with trim. It’s easy and affordable just adding some trim to touch up the edges of your bar. Once the bar is ready, simply add a kegerator with a beer tap and some beer tap handles. Of course, you know what to do. Go with your favorite beer.

Décor

Starting with shelves to hold a collection of beer glasses is the first place I would go once the bar is in place. You can start collecting sets of beer mugs and glasses that represent different beer choices and different pub locations. People get real excited when they see their beer of choice on your walls or if you have a mug of an exotic bar half way around the world. Those are the types of things that start adding your personality to the bar.

Putting beer signs and mirrors on your walls is the next place for you to go. I once met a friend bartender of mine at his bar because we had plans. I arrived right on time because the beer distributor had just shown up to stock more beer in the bar. That’s the perfect time to get great stuff. I was offered a rare beer mirror that the distributor was told to send around with their drivers on deliveries and offer them as a promotion to different bars they serviced. The driver didn’t care who he was giving mirrors to and I ended up with one.

You may not have that kind of luck. But, everyone can look online for unique beer signs and mirrors that they can purchase to decorate their bar. You can start with a few just to get yourself going and then keep your ears and eyes open for opportunities.

Bar Accessories

Your bar is almost finished. But, it’s not quite ready for company yet. You have to add those types of things no one else has. It’s not as tricky as you might think. But, it does take some “good eye” action and be ready for the moment.

A Jagermeister machine is in just about every bar. But, I have rarely seen one in a home bar. Having a Jagermeister machine steps you up into the professional realm where your friends and family will really be impressed.

But, the hottest trend sweeping the nation right now is beer pong. Having a beer pong table with some great beer pong accessories will make for hours of fun when you have company over to your house. There will always be some people who won’t want to hang out in the bar. They’ll want to sit at the dining room table and talk. Well, let them. Have fun playing beer pong for hours while they talk politics on their stuffy bums.

Home bars aren’t necessarily hard to put together. A little planning and you can have an affordable home bar with very little effort. Then, start adding some of your personality to it so that it’s undeniably yours. Friends who didn’t think of it first will be very envious.

Putting The Home Bar Together The Easy Way

When you have your bar and your cabinets built, you’ll want to get to drinking in it…Now.  But, I’ve seen some make shit jobs that aren’t really all that great.  Then, I’ve seen some expensive setups that are way out of the reach of most of us.

So, here’s the home bar the easy way:

The kegerator is the first thing you put in your bar.  It keeps your keg cool and it adds style in an inexpensive way.

This kegerator can actually make the entire bar.  If you choose to use a kegerator like this to hold your kegs, you can make it a part of the bar’s counter top.  Then, you only need counter space on each side.  That’s a setup made easy, as easy as it gets. 

Grab a tap handle of your favorite beer and now you’ve got something to really get you bragging.  There are tap handles of all kinds, from your favorite domestic to your favorite import.  As a promotional tool, every beer you can think of has a beer tap handle for commercial uses as well as the home bar enthusiast.

But, just in case you have a beer of your own or some other “unrecognizable” libation, get the beer tap handle you can write anything on that you want. 

Tell people, “Try Me!”  Give your concoction a name.  Have fun with it and write, “Make Your Own Beer…” or whatever else you might come up with to prank your friends.

You’ve got the bar.  Dress it up in style.  The kegerator and a beer tap handle can turn any room into a bar.  Your bedroom, your dorm room (oops), your garage, your basement, your tree house…

Anywhere!

How To Make Your Home Bar More Bar And Less Home

When you are trying to create a bar in your home, of course you begin with the taps and the handles, mirrors and signs.  You built a bar!  It has to look right.  Right?

But when the bar is in place and you think you have it all, what kind of lame bar serves draft beer in plastic cups?  And I’ll be willing to bet that’s what you have.  Red plastic cups that you bought at the grocery store.  Hmm…all that work and then you tap out at the end.

Well, you can add some specialty glasses so that your friends are drinking in style.  This is where it gets tricky, but you can manage.  You don’t just want to get mugs of any kind.  You need to stock up your cabinets with mugs of all kinds.

Vintage mugs from old fashioned beers add such a touch of class.  Especially when you have friends asking you where you got the mugs.  That’s when you realize saving money on those red plastic cups wasn’t worth it after all.

But, don’t stop there.  You should have Pilsners and Pints, Dimpled Mugs and Retro Pubs.  Get mugs with different logos like Coors, Molson, Blue Moon and Killian.  It’s a blast to make sure that you drink out of the right glass for the right kind of draft.

Logo Beer Glasses

DIY Kegerator – A Beer Keg In Your Refrigerator Or Wherever Else

It’s been a dream for many beer drinkers around the world.  But, putting a keg in an old refrigerator for your apartment, den or garage isn’t that hard to do when you have the right material.

A Kegerator Conversion Kit is all you need and there is something that you may have never thought about, but it’s a surprise and I’ll tell you in a minute.  These conversion kits change any old refrigerator into a kegerator in minutes.  Install the shank and faucet directly in to the door of your refrigerator and hook up the Co2 inside.  You’ll be drinking from your kegerator in no time at all.

But, here’s something that not many people think about.  The Kegerator Conversion Kit can also be used for other home bar designs.  Wall mount it to a closet.  That’s right!  Turn your closet into a kegerator.

All you need to do is install the shank and faucet on the wall the way you would the door of your refrigerator.  Then, grab a large trash can full of ice just like you would for a normal keg party.  Hook up the Co2 inside the closet and you are ready to drink some cold beer with the keg hidden in the closet, fully functional for your party.  Of course, this is really only good for keg parties when you have them.  But, you can try to keep ice in the trash can as you keep swapping out kegs.

As this idea starts to spark the imagination, I want to see Kegerators everywhere!  Garages, Bedrooms, Kitchens, Living Rooms, Bathrooms, through the wall to the Patio outside…etc.

Beertaps has the Kegerator Conversion Kit you need!

George Washington – Beerthusiast

Posted by CarBoy Films

The Father of Our Country loved his beer.  English–style porter was George Washington’s drink of choice and whenever he could he would seek out the product of Robert Hare, a brewer in Philadelphia who was one of the first to make porter in the U.S. Washington was no stranger to homebrew either and this recipe from a personal notebook he kept will make 30 gallons of ale, enough for a large household like Mount Vernon.

"Take a large Sifter full of Bran, Hops to your Taste—Boil these 3 hours.  Then strain out 30 Gallons into a Cooler put in 3 Gallons Molasses while the Beer is scalding hot or rather drain the molasses into the Cooler. Strain the Beer on it while boiling hot let this stand til it is little more than Blood warm. Then put in a quart of Yeast if the weather is very cold cover it over with a Blanket. Let it work in the Cooler 24 hours then put it into the Cask. leave the Bung open til it is almost done working—Bottle it that day Week it was Brewed."

"To Make Small Beer” is the title of this recipe. “Small beer” is normally brew made from the second runnings through the mash for strong ale and the beer that is created has very little alcohol (about 3%).  However, a note on the NPR website says that the above recipe produces a beer with an alcohol content of about 11 %.  If this was George’s “small beer” then consumption of his “large beer” must have somehow disrupted space-time for its imbiber. Compare that ABV to a popular modern American brew, say Sam Adams Boston Lager at 4.9%, and you realize that “Town Destroyer”, as the Iroquois nicknamed Washington, wasn’t effin around.   In fact, I think he might have been trying to kill himself and anyone around him.

So if you try this recipe use caution (or just less molasses) and for God’s sake send us pictures of the aftermath.

Image by cliff1066